Multi-Pure Drinking Water Filtration Systems 
        
                                                  Enjoy Healthier, Cleaner, Better Tasting Drinking Water!      

MultiPure MP1200EL Undersink Water Filters

Our Cost Efficient Model - Multi Pure MP1200EL Undersink Water Filters Come With An Electronic Capacity Metered Faucet That Automatically Monitors Gallons Used And Lets You Know When To Change Your Filter Providing You With Highly Effective Water Filtration At The Lowest Possible Operating Cost...

Multi-Pure Undersink Water Filters Are Convenient, Providing You With Healthy, High Quality Drinking Water With Just A Push Of Your Fingertip...

multipure mp1200el undersink water filters   Effective And Efficient,  MP1200EL Under Sink Water Filters Give You More Gallons At Less Cost Per
   Gallon....    Operating Cost Is Just 5 Cents Per Gallon!
   
Comes With The 0.5 Micron Solid Carbon Block Filter - NSF Certified To Reduce A Wide
   Range Of Contaminants Of Health Concern... 
   This water filter can sit on the cabinet floor or be  mounted on the cabinet wall with a bracket.
   The system uses its own designer faucet which is installed directly on your sink, 
   requiring little space.  MP1200EL Undersink Water Filters may be connected to an icemaker
   using an icemaker tee, and it may be converted to a countertop unit with the purchase of a
   conversion kit.    Lifetime Warranty and 90 Day Customer Satisfaction Guarantee...

      Capacity Rating 1200 gallons or 1 year     
      Operating Cost = Only 5 Cents Per Gallon
        Replacement Filter Cost - $56.95 multipure capacity monitor


      Custom Design Chrome Plated Stainless Steel Faucet With Capacity Monitor
      That Lights Up Telling You When To Change Your Filter...

      Replacement Filter Cost Is One Of The Main Factors To Consider When Choosing Any Water Filter...
      MultiPure Long LIfe Water Filters Combined WithThe Capacity Meter Is The Most Efficient Water
      Filtration System Available Providing You With More Drinking Water For Less Cost...





                          List Price $484.95           Plus Tax and $9.00 Shipping

Special Discount - To See Our Low Discount Price Just Click "Add To Cart"  and  Enter Multi-Pure Dicount Coupon  414220--disc  To See Your Savings

Request Your
Free Gift  In Special Instuctions During Checkout

Custom Designer Faucets Are Available For Any Undersink System





Save Even More!               Get Your MP1200EL For FREE 

FM1200EL    Purchase 10 Replacement Filters Today and Get A FREE MP1200EL Drinking Water Filtration System
List  $679.50      Purchase From Our 
Factory Site    or     See Our FM Products For Details 

0% Same As Cash Easy Payment Plan Available - Call MultiPure Customer Service 800 622 9208 or Contact Us For Details...

Be Sure To Mention Our 
MultiPure Discount Coupon Codes - Distributor Name: Patti Wilson #414220 To Receive Discount

Don't Forget Your 
FREE Gift - Request In "Ordering Instructions" During Checkout...

 

                       See Our FM Products For Details 

WHY MULTIPURE?

Multi-Pure Drinking Water Systems are one of the most effective, economical, convenient and reliable home water filters available today.  Highly rated for quality, value, and performance...   Every MultiPure Water Filter comes with a 90 day Customer Satisfaction Guarantee, and Lifetime Warranty...  

Multi-Pure's systems are certified by NSF to reduce a wide range of contaminants of health concern, as well as aesthetically improve your tap water.

Multi-Pure Drinking Water Systems reduce MTBE,
chlorination by-products, PCBs, chloramine, pesticides, herbicides, heavy metals like lead and mercury, and many other contaminants of health concern. 

Beneficial minerals remain in the water.

Does Not Remove Arsenic or Remove Fluoride  ...     

Nothing harmful is added to the water.

Filters should be replaced once a year.

A variety of systems are available to suit any budget.

Healthier, cleaner water is conveniently available right at your kitchen sink.

Below the sink unit can be attached to a refrigerator or instant hot dispenser.

The countertop unit is portable and easy to move.

Multi-Pure water costs about 8 cents per gallon.

There is a lifetime warranty on the stainless steel and plastic housings provided that the filter be changed at least once a year),
1 year on the accessories, and a 90-day money-back guarantee! 
 

What Makes Multi-Pure So Effective?

Nationally recognized standards established for the drinking water treatment industry confirm that the most effective systems for the removal of both aesthetic and harmful contaminants are those that utilize solid carbon block filters.

The Multi-Pure densely compacted solid carbon block filter has the ability to micro-strain every molecule of water through microscopic pores. The large surface area allows the water to be in contact with the carbon for a longer period of time, providing greater adsorption of the many different chemicals, pesticides, herbicides and certain heavy metals. Contaminants with a physical size are removed when water passes through the pre-filter, which helps keep the carbon block from clogging prematurely.

The developer of the solid carbon block filter technology, Multi-Pure Drinking Water Systems has been a leading manufacturer in the industry since 1970 and has gained a reputation for performance and quality.

Why is the NSF Certification important?

NSF is an internationally recognized, not-for-profit, third-party testing organization that tests and certifies products to
ensure they meet strict public health standards.

Certified products are tested to verify that they meet certain standards for health and aesthetics. The end result for the
customer is the assurance that a system will do what the literature says it will do.

Certification by NSF assures the consumer that:

1.  Claims of contaminant reduction are true.
2.  The system does not add anything harmful to the water
3.  The system is structurally sound.
4.  Advertising, literature and labeling are not misleading.
5.  Materials and manufacturing processes do not change.

To ensure that manufacturers continue to meet these requirements, NSF conducts unannounced inspections of
manufacturing facilities at least once a year.

Drinking water systems are tested under Standard 42 for Aesthetic Effects (taste, odor, and color) and Standard 53
for Health Effects (contaminants that are considered as established or potential health hazards).

Multi-Pure Drinking Water Systems are certified to reduce particulate matter down to 0.5 micron, and to reduce
chlorine, chloramine, taste and odor problems, certain pesticides, cysts, VOCs, trihalomethanes, MTBE, and PCBs.

Multi-Pure Drinking Water Systems have been listed, certified, and/or registered by the following:

                                    NSF International

                                    California Department of Health Services Water Treatment Device 

                                    Iowa Department of Public Health

                                    State of Wisconsin, Bureau of Building Water Systems, Research and Product Review 

                                    State of Massachusetts, Board of Plumbing

                                    State of Colorado, Department of Health, Drinking Water Program

Specifications:

Housing Composition Stainless Steel

Faucet Composition Chrome Plated Stainless Steel Lead-Free

Rubber Items Neoprene

Inlet 3/8” Pipe

Outlet 1/4” Pipe

Replacement Filter Model CB6

Approximate Capacity 1200 Gallons

Approx. Flow Rate 0.75 gpm @ 60 psi

Water Pressure 100 psi max/30 psi min

Weight (Basic Unit) 5.0 lbs.

Height 9.4 inches

Body diameter 6.0 inches

Particulate Retention Size Sub Micron (0.5 micron)

Housing Warranty Lifetime

Performance Data Sheet

Multi-Pure Drinking Water Filters have been tested and certified under NSF/ANSI Standard Nos. 53 as shown below. The concentration of the indicated substances in water entering the MultiPure Water Filter was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 53, Health Effects. 

 

For Model Nos. MP750SB, MP1200EL, MP750SC, MP750SI, MPAD, MPCT

Substance           Percent Reduction

Influent challenge :
Maximum permissible product water concentration (mg/L unless specified)   

ALACHLOR* >98% 0.05 0.001
ASBESTOS >99.9%
107 to 108
fibers/L; fibers greater than 10 micrometers in length 99% reduction requirement
ATRAZINE* >97% 0.1 0.003
BENZENE* >99% 0.081 0.001
BROMODICHLOROMETHANE (TTHM)* >99.8% 0.300 +/- 0.30 0.015
BROMOFORM (TTHM)* >99.8% 0.300 +/- 0.30 0.015
CARBOFURAN (Furadan)* >99% 0.19 0.001
CARBON TETRACHLORIDE* 98% 0.078 0.0018
CHLORDANE >99.5% 0.04 +/-10% 0.002
CHLOROBENZENE (Monochlorobenzene)* >99% 0.077 0.001
CHLOROPICRIN* 99% 0.015 0.0002
CHLOROFORM (TTHM)* (surrogate chemical) >99.8% 0.300 +/- 0.30 0.015
Cryptosporidium (CYST) 99.95% minimum 50,000/mL 99.95%

99.95% minimum 50,000/mL 99.95%
2, 4-D* 98% 0.110 0.0017
DBCP (see Dibromochloropropane)* >99% 0.052 0.00002
1,2-DCA (see 1,2-DICHLOROETHANE)* 95% 0.088 0.0048
1,1-DCE (see 1,1-DICHLOROETHYLENE)* >99% 0.083 0.001
DIBROMOCHLOROMETHANE (TTHM;Chlorodibromomethane)*>99.8% 0.300 +/- 0.30 0.015
DIBROMOCHLOROPROPANE (DBCP)* >99% 0.052 0.00002
o-DICHLOROBENZENE (1,2 Dichlorobenzene)* >99% 0.08 0.001
p-DICHLOROBENZENE (para-Dichlorobenzene)* >98% 0.04 0.001
1,2-DICHLOROETHANE (1,2-DCA)* 95% 0.088 0.0048
1,1-DICHLOROETHYLENE (1,1-DCE)* >99% 0.083 0.001
CIS-1,2-DICHLOROETHYLENE* >99% 0.17 0.0005
TRANS-1,2- DICHLOROETHYLENE* >99% 0.086 0.001
1,2-DICHLOROPROPANE (Propylene Dichloride)* >99% 0.08 0.001
CIS-1,3- DICHLOROPROPYLENE* >99% 0.079 0.001
DINOSEB* 99% 0.17 0.0002
EDB (see ETHYLENE DIBROMIDE)* >99% 0.044 0.00002
ENDRIN* 99% 0.053 0.00059
Entamoeba (see CYSTS) 99.95% minimum 50,000/mL 99.95%
ETHYLBENZENE* >99% 0.088 0.001
 
ETHYLENE DIBROMIDE (EDB)* >99% 0.044 0.00002
Furadan (see CARBOFURAN)* >99% 0.19 0.001
 

**Percent reduction reflects actual performance of Multi-Pure Water Filters as specifically tested (at 200% of capacity). Percent reduction shown for VOCs* reflects the allowable claims for Volatile Organic Chemicals/Compounds as per Tables.

Chloroform was used as a surrogate for VOC reduction claims: the Multi-Pure Water Filters actual reduction rate of

Chloroform was >99.8% as tested (at 200% of capacity). 

 Substance Percent Reduction**

Influent challenge concentration (mg/L unless specified)  

 Maximum permissible product water concentration (mg/L unless specified)

Giardia Lamblia (see CYST) >99.95% minimum 50,000/mL 99.95%

HALOACETONITRILES (HAN)*

BROMOCHLOROACETONITRILE 98% 0.022 0.0005

DIBROMOACETONITRILE 98% 0.024 0.0006

DICHLOROACETONITRILE 98% 0.0096 0.0002

TRICHLOROACETONITRILE 98% 0.015 0.0003

HALOKETONES (HK):*

1,1-DICHLORO-2-PROPANONE 99% 0.0072 0.0001

1,1,1-TRICHLORO-2-PROPANONE 96% 0.0082 0.0003

HEPTACHLOR* >99% 0.25 0.00001

HEPTACHLOR EPOXIDE* 98% 0.0107 0.0002

HEXACHLOROBUTADIENE (Perchlorobutadiene)* >98% 0.044 0.001

HEXACHLOROCYCLOPENTADIENE* >99% 0.060 0.000002

LEAD (pH 6.5) >99.3% 0.15 +/- 10% 0.010

LEAD (pH 8.5) >99.3% 0.15 +/- 10% 0.010

LINDANE* >99% 0.055 0.00001

MERCURY (pH 6.5) >99% 0.006 +/- 10% 0.002

MERCURY (pH 8.5) >99% 0.006 +/- 10% 0.002

METHOXYCHLOR* >99% 0.050 0.0001

Methylbenzene (see TOLUENE)* >99% 0.078 0.001

Monochlorobenzene (see CHLOROBENZENE)* >99% 0.077 0.001

 MTBE (methyl tert-butyl ether) >96.6% 0.015 +/- 20% 0.005 
 

POLYCHLORINATED BIPHENYLS (PCBs , Aroclor 1260) >99.9% 0.01 +/- 10% 0.0005

PCE (see TETRACHLOROETHYLENE)* >99% 0.081 0.001

PENTACHLOROPHENOL* >99% 0.096 0.001

Perchlorobutadiene (see HEXACHLOROBUTADIENE)* >98% 0.044 0.001

Propylene Dichloride (see 1,2 -DICHLOROPROPANE)* >99% 0.080 0.001

SIMAZINE* >97% 0.120 0.004

Silvex (see 2,4,5-TP)* 99% 0.270 0.0016 

STYRENE (Vinylbenzene)* >99% 0.15 0.0005

1,1,1-TCA (see 1,1,1 - TRICHLOROETHANE)* 95% 0.084 0.0046

TCE (see TRICHLOROETHYLENE)* >99% 0.180 0.0010   

2,2- TETRACHLOROETHANE*
>99% 0.081 0.001
 

TETRACHLOROETHYLENE* >99% 0.081 0.001  

TOLUENE
(Methylbenzene)* >99% 0.078 0.001
     

TOXAPHENE >92.9% 0.015 +/- 10% 0.003

Toxoplasma (see CYSTS) 99.95% minimum 50,000/mL 99.95%

2,4,5-TP (Silvex)* 99% 0.270 0.0016  

TRIBROMOACETIC ACID*
0.042 0.001
   

1,2,4 TRICHLOROBENZENE (Unsymtrichlorobenzene)* >99% 0.160 0.0005          

1,1,1-TRICHLOROETHANE (1,1,1-TCA)* 95% 0.084 0.0046

1,1,2-TRICHLOROETHANE*
>99% 0.150 0.0005
 

TRICHLOROETHYLENE (TCE)* >99% 0.180 0.0010

TRIHALOMETHANES (TTHM) (Chloroform; Bromoform;

Bromodichloromethane; Dibromochloromethane)>99.8% 0.300 +/- 0.30 0.015

TURBIDITY ( >99% 11 +/- 1 NTU 0.5 NTU

TRICHLOROBENZENE)* >99% 0.160 0.0005

Vinylbenzene (see STYRENE)* >99% 0.150 0.0005  

XYLENES
(TOTAL)* >99% 0.070 0.001
S:  

1. Multi Pure Drinking Water Filters have been certified, as indicated, by NSF International for compliance to NSF/ANSI Standard
    Nos. 42 & 53.

2. The MultiPure Drinking Water Filters have been certified by the State of California Department of Health Services for the reduction
    of specific
contaminants listed herein.

3. Chloroform was used as a surrogate for claims of reduction of VOCs. MultiPure Water Filters tested at >99.8% actual reduction
    of Chloroform. Percent
reduction shown herein reflects the allowable claims for VOCs as per tables in the Standard.

4. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the
    system.

    MultiPure Water Filters certified for cyst reduction may be used on disinfected water that may contain filterable cysts.5.
    Water Filter life will vary in proportion to the amount of water used and the level of impurities in the water being processed.
    For optimum performance, it is essential that the filter be replaced on a regularly scheduled basis as follows: (a) annually;
    (b) when the unit’s rated capacity has been reached; (c)
the flow rate diminishes; (d) the Multi Pure Water Filter becomes
    saturated with bad tastes and odors.

6. Model No. MP1200EL includes a capacity monitor that automatically flashes a yellow light when it is time to replace your
    MultiPure Water Filter.

7. Multi-Pure Drinking Water System Housings are warranted for Lifetime (*provided that the water filter be replaced at least once a
    year). All exterior hoses
and attachments to the Multi-Pure Water Filtration System are warranted for one year. Please see the
    Owner’s Manual for complete product guarantee and warranty
information.

8. Please see the Owner’s Manual for installation instructions and operating procedures.

9. In compliance with New York law, it is recommended that before purchasing a water treatment system, NY residents have their
    water supply tested
to determine their actual water treatment needs. Please compare the capabilities of the Multi-Pure unit with
    your actual water purification needs.

10. Check for compliance with state and local laws and regulations.

11. While testing was performed under standard laboratory conditions, actual performance may vary.

12. The list of substances which the treatment device reduces does not necessarily mean that these substances are present in your
      tap water.
 



               All MP750 Models - MPAD - MP 1200EL - MPCT

Approximate Service Capacity (6) 750 gallons 1200 gallons 750 gallons 

Replacement Filter Type Model No./ Approx. Cost CB6/$60 CB6/$60 CBAD/$60

Approximate Flow Rate @ 60 psi 0.75 gpm 0.75 gpm 0.75 gpm

Maximum Water Pressure 100 psi/7.0 kg/cm2 100 psi/7.0 kg/cm2 100 psi/7.0 kg/cm2

Minimum Water Pressure 30 psi/2.1 kg/cm2 30 psi/2.1 kg/cm2 30 psi/2.1 kg/cm2

Maximum Operating Temperature 100°F/38°C

for cold water use only

 

 

 

 

 

 
Top Of Page        


Back To Shopping Home Page    

  

Model MP750SB      Model MP750PlusRO      Model MP880EL      Model MP880SB