Multi-Pure Drinking Water Filtration Systems 
        
                                                  Enjoy Healthier, Cleaner, Better Tasting Drinking Water!      

Undersink Water Filters - MultiPure MP750SB
MP750 - Below the Sink

Multi-Pure MP750SB Under Sink Water Filtration Systems can sit on the cabinet floor or be  mounted on the cabinet wall with a bracket.  The MultiPure MP750SB Water Filter uses its own designer faucet which is installed directly on your sink, requiring little space. The Multi-Pure MP750SB Water Filter may also be connected to an icemaker using an icemaker tee, and may be converted to a countertop system with the purchase of a conversion kit. Filter life expectancy is approximately 750 gallons.
The Multi-Pure MP750SB Undersink Water Filtration System Reduces a wide range of contaminants including Cysts, Lead, PCBs, MTBE, Mercury, Asbestos, Chloramine, VOCs and many more other contaminants of health concern.



Replacement Filter: CB6
Replacement Filter Cost: $59.95
Operating Cost Approx 8 Cents Per Gallon

List Price: $399.95                      Add To Cart

Click "Add To Cart"  -  Use Multi-Pure Discount Coupon :  414220-disc

and "Recalculate" To See Your Savings!

Custom Designer Faucets Are Available For Any Undersink System
                     
                                                                                   
 
We Offer The Maximum Discount Allowed By The Manufacturer
____________________________________________________________________________________________________________

FM750SB - Purchase 10 Replacement Filters and
Get Your MP750SB For FREE

 Now $599.50        

   
You'll receive a Free MP750SB unit with filter and 9 replacement filter coupons
See Our 
FM Products For Details  or Visit Our Factory Site To Purchase...
______________________________________________________________________



                                                  
Back To Home Page

Specifications:

Housing Composition Stainless Steel

Faucet Composition Chrome Plated Lead-Free

Rubber Items Neoprene

Inlet 3/8” Pipe

Outlet 1/4” Pipe

Replacement Filter Model CB6

Approximate Capacity 1200 Gallons

Approx. Flow Rate 0.75 gpm @ 60 psi

Water Pressure 100 psi max/30 psi min

Weight (Basic Unit) 5.0 lbs.

Height 9.4 inches

Body diameter 6.0 inches

Particulate Retention Size Sub Micron (0.5 micron)

Housing Warranty Lifetime

Performance Data Sheet

Multi-Pure Drinking Water Filters have been tested and certified under NSF/ANSI Standard Nos. 53 as shown below. The concentration of the indicated substances in water entering the MultiPure Water Filter was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 53, Health Effects.

 For Model Nos. MP750SB, MP1200EL, MP750SC, MP750SI, MPAD, MPCT

Substance           Percent Reduction

Influent challenge :
Maximum permissible product water concentration (mg/L unless specified)

ALACHLOR* >98% 0.05 0.001ASBESTOS >99.9% 107 to 108 fibers/L; fibers greater than 10 micrometers in length 99% reduction requirement 

Atr
AZINE* >97% 0.1 0.003

BENZENE*
>99% 0.081 0.001
 

BROMODICHLOROMETHANE (TTHM)* >99.8% 0.300 +/- 0.30 0.015

 

BROMOFORM (TTHM)* >99.8% 0.300 +/- 0.30 0.015

CARBOFURAN (Furadan)* >99% 0.19 0.001

CARBON TETRACHLORIDE* 98% 0.078 0.0018

CHLORDANE >99.5% 0.04 +/-10% 0.002

CHLOROBENZENE (Monochlorobenzene)* >99% 0.077 0.001

CHLOROPICRIN* 99% 0.015 0.0002

CHLOROFORM (TTHM)* (surrogate chemical) >99.8% 0.300 +/- 0.30 0.015

Cryptosporidium (CYST) 99.95% minimum 50,000/mL 99.95%  

 

CYST (Giardia; Cryptosporidium; Entamoeba; Toxoplasma)  99.95% minimum 50,000/mL 99.95%

2, 4-D* 98% 0.110 0.0017

DBCP (see Dibromochloropropane)* >99% 0.052 0.00002

1,2-DCA (see 1,2-DICHLOROETHANE)* 95% 0.088 0.0048

1,1-DCE (see 1,1-DICHLOROETHYLENE)* >99% 0.083 0.001 

DIBROMOCHLOROMETHANE (TTHM;Chlorodibromomethane)*>99.8% 0.300 +/- 0.30 0.015
 

 

DIBROMOCHLOROPROPANE (DBCP)* >99% 0.052 0.00002

o-DICHLOROBENZENE (1,2 Dichlorobenzene)* >99% 0.08 0.001

p-DICHLOROBENZENE (para-Dichlorobenzene)* >98% 0.04 0.001

1,2-DICHLOROETHANE (1,2-DCA)* 95% 0.088 0.0048

1,1-DICHLOROETHYLENE (1,1-DCE)* >99% 0.083 0.001

CIS-1,2-DICHLOROETHYLENE* >99% 0.17 0.0005

TRANS-1,2- DICHLOROETHYLENE* >99% 0.086 0.001

1,2-DICHLOROPROPANE (Propylene Dichloride)* >99% 0.08 0.001

CIS-1,3- DICHLOROPROPYLENE* >99% 0.079 0.001

DINOSEB* 99% 0.17 0.0002

EDB (see ETHYLENE DIBROMIDE)* >99% 0.044 0.00002

ENDRIN* 99% 0.053 0.00059

Entamoeba (see CYSTS) 99.95% minimum 50,000/mL 99.95%

ETHYLBENZENE* >99% 0.088 0.001 

ETHYLENE DIBROMIDE (EDB)* >99% 0.044 0.00002

Furadan (see CARBOFURAN)* >99% 0.19 0.001 

**Percent reduction reflects actual performance of Multi-Pure Water Filters as specifically tested (at 200% of capacity). Percent reduction shown for VOCs* reflects the allowable claims for Volatile Organic Chemicals/Compounds as per Tables.

Chloroform was used as a surrogate for VOC reduction claims: the Multi-Pure Water Filters actual reduction rate of

Chloroform was >99.8% as tested (at 200% of capacity). 

Substance Percent Reduction**

Influent challenge concentration (mg/L unless specified) 

Maximum permissible product water concentration (mg/L unless specified)

Giardia Lamblia (see CYST) >99.95% minimum 50,000/mL 99.95%

HALOACETONITRILES (HAN)*

BROMOCHLOROACETONITRILE 98% 0.022 0.0005

DIBROMOACETONITRILE 98% 0.024 0.0006

DICHLOROACETONITRILE 98% 0.0096 0.0002

TRICHLOROACETONITRILE 98% 0.015 0.0003

HALOKETONES (HK):*

1,1-DICHLORO-2-PROPANONE 99% 0.0072 0.0001

1,1,1-TRICHLORO-2-PROPANONE 96% 0.0082 0.0003

HEPTACHLOR* >99% 0.25 0.00001

HEPTACHLOR EPOXIDE* 98% 0.0107 0.0002

HEXACHLOROBUTADIENE (Perchlorobutadiene)* >98% 0.044 0.001

HEXACHLOROCYCLOPENTADIENE* >99% 0.060 0.000002

LEAD (pH 6.5) >99.3% 0.15 +/- 10% 0.010

LEAD (pH 8.5) >99.3% 0.15 +/- 10% 0.010

LINDANE* >99% 0.055 0.00001

MERCURY (pH 6.5) >99% 0.006 +/- 10% 0.002

MERCURY (pH 8.5) >99% 0.006 +/- 10% 0.002

METHOXYCHLOR* >99% 0.050 0.0001

Methylbenzene (see TOLUENE)* >99% 0.078 0.001

Monochlorobenzene (see CHLOROBENZENE)* >99% 0.077 0.001

MTBE (methyl tert-butyl ether) >96.6% 0.015 +/- 20% 0.005

POLYCHLORINATED BIPHENYLS (PCBs , Aroclor 1260) >99.9% 0.01 +/- 10% 0.0005

PCE (see TETRACHLOROETHYLENE)* >99% 0.081 0.001
PENTACHLOROPHENOL* >99% 0.096 0.001

Perchlorobutadiene (see HEXACHLOROBUTADIENE)* >98% 0.044 0.001

Propylene Dichloride (see 1,2 -DICHLOROPROPANE)* >99% 0.080 0.001
SIMAZINE* >97% 0.120 0.004

Silvex (see 2,4,5-TP)* 99% 0.270 0.0016

STYRENE (Vinylbenzene)* >99% 0.15 0.0005
 
1,1,1-TCA (see 1,1,1 - TRICHLOROETHANE)* 95% 0.084 0.0046

TCE (see TRICHLOROETHYLENE)* >99% 0.180 0.0010

1,1,2,2- TETRACHLOROETHANE* >99% 0.081 0.001

TETRACHLOROETHYLENE* >99% 0.081 0.001

TOLUENE (Methylbenzene)* >99% 0.078 0.001

TOXAPHENE >92.9% 0.015 +/- 10% 0.003

Toxoplasma (see CYSTS) 99.95% minimum 50,000/mL 99.95%

2,4,5-TP (Silvex)* 99% 0.270 0.0016

TRIBROMOACETIC ACID* 0.042 0.001

1,2,4 TRICHLOROBENZENE (Unsymtrichlorobenzene)* >99% 0.160 0.0005

1,1,1-TRICHLOROETHANE (1,1,1-TCA)* 95% 0.084 0.0046

1,1,2-TRICHLOROETHANE* >99% 0.150 0.0005

TRICHLOROETHYLENE (TCE)* >99% 0.180 0.0010

TRIHALOMETHANES (TTHM) (Chloroform; Bromoform

Bromodichloromethane; Dibromochloromethane)
>99.8% 0.300 +/- 0.30 0.015

TURBIDITY ( >99% 11 +/- 1 NTU 0.5 NTU

TRICHLOROBENZENE)* >99% 0.160 0.0005

Vinylbenzene (see STYRENE)* >99% 0.150 0.0005

XYLENES (TOTAL)* >99% 0.070 0.001

N
OTES:
   

 

1. Multi Pure Drinking Water Filters have been certified, as indicated, by NSF International for compliance to NSF/ANSI Standard Nos. 42 & 53.

2. The MultiPure Drinking Water Filters have been certified by the State of California Department of Health Services for the reduction of specific contaminants listed herein.

3. Chloroform was used as a surrogate for claims of reduction of VOCs. MultiPure Water Filters tested at >99.8% actual reduction of Chloroform. Percent reduction shown herein reflects the allowable claims for VOCs as per tables in the Standard.

4. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

MultiPure Water Filters certified for cyst reduction may be used on disinfected water that may contain filterable cysts.5. Water Filter life will vary in proportion to the amount of water used and the level of impurities in the water being processed. For optimum performance, it is essential that the filter be replaced on a regularly scheduled basis as follows: (a) annually; (b) when the unit’s rated capacity has been reached; (c) the flow rate diminishes; (d) the Multi Pure Water Filter becomes saturated with bad tastes and odors.

6. Model No. MP1200EL includes a capacity monitor that automatically flashes a yellow light when it is time to replace your MultiPure Water Filter.

7. Multi-Pure Drinking Water System Housings are warranted for Lifetime (*provided that the water filter be replaced at least once a year). All exterior hoses and attachments to the Multi-Pure Water Filtration System are warranted for one year. Please see the Owner’s Manual for complete product guarantee and warranty information.

8. Please see the Owner’s Manual for installation instructions and operating procedures.

9. In compliance with New York law, it is recommended that before purchasing a water treatment system, NY residents have their water supply tested to determine their actual water treatment needs. Please compare the capabilities of the Multi-Pure unit with your actual water purification needs.

10. Check for compliance with state and local laws and regulations.

11. While testing was performed under standard laboratory conditions, actual performance may vary.

12. The list of substances which the treatment device reduces does not necessarily mean that these substances are present in your tap water.

MP750xx/MPCT MP1200EL MPAD

Approximate Service Capacity (6) 750 gallons 1200 gallons 750 gallons

Replacement Filter Type Model No./ Approx. Cost CB6/$60 CB6/$60 CBAD/$60

Approximate Flow Rate @ 60 psi 0.75 gpm 0.75 gpm 0.75 gpm

Maximum Water Pressure 100 psi/7.0 kg/cm2 100 psi/7.0 kg/cm2 100 psi/7.0 kg/cm2

Minimum Water Pressure 30 psi/2.1 kg/cm2 30 psi/2.1 kg/cm2 30 psi/2.1 kg/cm2

Maximum Operating Temperature 100°F/38°C  

for cold water use only  

 

 

 

 

 

NSF INTERNATIONAL® 

NSF International, The Public Health and Safety Company - a not for profit, non-governmental organization, is the world leader in standards development, product certification, education, and risk-management for public health and safety. For more than 59 years, NSF has been committed to public health, safety, and protection of the environment. While focusing on food, water, indoor air, and the environment, NSF develops national standards, provides learning opportunities through its Center for Public Health Education, and provides third-party conformity assessment services while representing the interests of all stakeholders.
The primary stakeholder groups include industry, the regulatory community, and the public at large.

For more information, call (734) 769-8010 or visit  www.nsf.org.

NSF certification of home water treatment covers four major areas.

1) Systems (and some components such as housings) that are intended for installation on a pressurized water line are checked for structural integrity to ensure they do not leak or crack.

2) Both complete systems and components can also go through extraction testing, which is a process that involves exposing the wetted parts (the parts that are intended for contact with the water, such as the inside of the housing, the filter media, etc.) to an aggressive test water to determine if any heavy metals or other impurities are being introduced. The standards limit the amount of impurities that a certified system can introduce, with the maximum allowed concentrations being based on US EPA or Health Canada drinking water limits.

3) Testing is available on assembled systems to verify if the product being tested is truly effective at reducing the contaminants being claimed by the manufacturer. A list of the contaminant testing protocols that are used to validate performance can be found in the pages of our website at
www.nsf.org/consumer/drinking_water.

4) Lastly, NSF will also verify the accuracy of the labeling on the packaging of NSF Certified systems to ensure it does not contain any false or misleading statements. While performance testing is done on a pass/fail basis, if a company chooses to put percentages on the product packaging, we will ensure they do match the official test results that specific product achieved. 

If you would like more information on NSF's drinking water treatment program, you can visit their web site at http://www.nsf.org     See NSF's Official Listing Of Contaminants Reduced By Multi-Pure Water Filters          See The NSF Video

View & Compare Multi-Pure's Superior Performance - Confirmed by NSF's Testing and Certification.

   Multi-Pure Drinking Water Filters National Sanitation Foundation Certification Information

The effectiveness of any drinking water purification or water treatment device is measured by the performance of its water filter.
NSF testing in accordance with
NSF/ANSI standards provides the consumer with the highest level of assurance that certified products will perform as claimed...
A
close review of NSF Listings shows that MultiPure’s solid carbon block water filters are the most effective for reducing a broad spectrum of contaminants of aesthetic as well as health concern....

Approximate Service Capacity -  Model MP750 - 750 gallons      Model 1200EL- 1200 gallons       MPAD - 750 gallons
Replacement Filter Type Model No./ Approx. Cost CB6/$60 CB6/$60 CBAD/$60
Approximate Flow Rate @ 60 psi 0.75 gpm 0.75 gpm 0.75 gpm
Maximum Water Pressure 100 psi/7.0 kg/cm2 100 psi/7.0 kg/cm2 100 psi/7.0 kg/cm2
Minimum Water Pressure 30 psi/2.1 kg/cm2 30 psi/2.1 kg/cm2 30 psi/2.1 kg/cm2
Maximum Operating Temperature 100°F/38°C
Minimum Operating Temperature 32°F/0°C
For Cold Water Use Only
32°F/0°C
Warranty on Housing: Lifetime
Warranty on Exterior Hoses and Attachments 1 year 1 year 1 year